Press “ Next” to go through the four (4 ) Set-Up Steps screensĬonnect the printer’s power supply, Power the printer, wait for solid and Status lights, and click “Wireless LAN Unit Setup” on the fourth set-up screen to continue.Įnter the Wi-Fi network Password, then click “APPLY” and “YES” to confirm.Ĭlick “Join” to connect the MCW10 to the Wi-Fi Network. ![]() The MCW10 is now connected with the Wi-Fi network and your printer can be used as a wireless printerĬongratulations, your wireless printer (with MCW10) setup and connection to your Wi-Fi network is now complete! iOS SetupĮnsure your device (tablet or smartphone) is connected to your Wi-Fi networkĭownload and install the “Star Quick Setup Utility” from Apple’s app store Select the printer and Click “YES” to confirm. Note: The Quick Setup app will automatically transfer the SSID and Security TypeĪllow the MCW10 set-up to complete ( ~1min), and Click “YES” when prompted Enter the Wi-Fi network Password, then click “APPLY” and “YES” Power Printer ON Wait for Solid POWER and LAN1 LED LightsĬlick “Discovered Wireless LAN Unit” and “SELECT” the WLAN Unit. Note: Click “Next” four (4) times to go through the set-up guide screens. USB cable: Connect one end to the MCW10 micro-USB port, and the other to the printer’s Lightning USB Type-A port for iOS devices.Įthernet Cable Connection USB Cable ConnectionĬonnect the printer’s power supply, Power the printer, wait for solid and Status lights, and click “Wireless LAN Unit Setup” to continue. Open the app, select “Start Guide (Initial Settings)” and click “Use Star Wireless LAN Unit”Ĭonnect the MCW10 to the printer using the included Ethernet and USB cables.Įthernet cable: Connect one end to the MCW10 port labeled LAN 1, and the other to the printer’s Ethernet (LAN) port ![]() ![]() Supported Printers: mC-Print Series (except MCP31C and 31CB), TSP100IIILAN and TSP100IV-UEĮnsure your device (tablet or smartphone) is connected to your networkĭownload and install the “Star Quick Setup Utility” from the Google app store Note: This product support 5GHz Wi-Fi Band, some can not use cause the connected device that not support send 5GHz Wi-Fi Band, please make sure your device support send 5GHz Wi-Fi Band before purchase. Introduction: This application note explains how to set up an MCW10 with the Star Quick Setup Utility on Android and iOS. After the driver is installed, you can use the built-in wireless utility in your operating system to connect to a wireless network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |